2.6.16.16 with CONFIG_BLK_DEV_SIIMAGE=y and CONFIG_SCSI_SATA_SIL=y
ata2: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: error=0x04 { DriveStatusError }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: no sense translation for status: 0x51
ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
dmesg:
libata version 1.20 loaded. sata_sil 0000:00:0c.0: version 0.9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ata1: SATA max UDMA/100 cmd 0xD0802080 ctl 0xD080208A bmdma 0xD0802000 irq 11 ata2: SATA max UDMA/100 cmd 0xD08020C0 ctl 0xD08020CA bmdma 0xD0802008 irq 11 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:407f ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil Vendor: ATA Model: WDC WD2500KS-00M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2500JS-55N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb